• Drivers Sfere Port Devices Online
• Drivers Sfere Port Devices Gigabit
• Drivers Sfere Port Devices Lucie
• Drivers Sfere Port Devices Bluetooth

Download the latest drivers, software, firmware, and diagnostics for your HP products from the official HP Support website. If a host has attached USB devices and resides in a DRS cluster with DPM enabled, disable DPM for that host. For instructions about overriding the default DPM setting for a single host, see vSphere Resource Management. To verify that the virtual machine meets the requirements for the USB device connection, see Connecting USB Devices to an ESXi. Enable the VCP Driver loading In the device “Properties”, open the “Advanced” tab and check whether the “Load VCP” option is enabled. Replug your device Unplug your USB device and connect it to your PC again. Now your operating system should be able to recognize the device, and Virtual COM Port Driver should be loaded.

This page offers six solutions to fix the USB device not recognized issue in Windows 10/8/7/XP. If you get this error message 'The last USB device you connected to this computer malfunctioned, Windows does not recognize it' or you cannot open your device, accessing data, read this article to fix this issue without data loss.

6 Fixes| USB Device Malfunctioned and Not Recognized

This page unveils six solutions to fix the 'USB device malfunctioned and is not recognized' issue. If you are having this USB device error, don't worry. Pick up any method below to make your USB recognizable and work again.

'USB device not recognized' is an error that usually occurs to the Windows computer when you plug in a USB device. Here, the USB device mentioned by Windows is a general concept, not limited to a USB hard drive or flash drive, but other devices using a USB port for connection, including a USB mouse, keyboard, Android phone, camera, printer, etc. When Windows generates such an error, the USB will not show up on your computer. As a result, you can't open your device or access your data. In different situations, the error is followed by different messages.

'The last USB device you connected to this computer malfunctioned, and Windows does not recognize it.'

'One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.'

The USB device malfunctioned and not recognized error has frustrated a large number of users. If you are one of the victims, here are some fixes you can try to resolve the issue and make your device detected.

How to Fix USB Device Not Recognized in Windows 10/8/7/XP/Vista

If your device is not recognized at the moment, you can try the below six solutions to make it show up again. You don't have to try every method, but we strongly recommend you follow the sequence, which our experts have tried many times.

Fix 1. Unplug your computer to fix the USB device malfunctioned

It sounds like a piece of cake thing to do, but it works! For most of not recognizing USB gadgets, there is typically nothing wrong. A computer restart could solve it. This way is meant to reboot the motherboard, which has all of the computer hardware connected to, including the USB ports. Rebooting the motherboard usually helps solve the temporary insufficient power supply for outside devices.

Step 1. Cut your computer power at its source, which is unplugging your computer from the wall outlet.

Step 2. Leave the computer alone for a few minutes, and then replug it in the wall outlet for a restart.

Step 3. Now check if the computer is able to detect the USB device and assign a drive letter to it.

If this fix failed, don't panic, the next methods are also doable.

Fix 2. Change the USB cable or USB port to Fix USB device not recognized

Is the computer's USB port working properly? You need to check the available USB ports one by one to see whether it is a computer hardware problem or a problem with the device itself. If changing to another port solves the problem, then there is something wrong with the previous port. You can give up that broken port, or send your computer for repair.

Fix 3. Update/Rollback a device driver if the USB device not recognized

Device Manager operation is another widely suggested way to troubleshoot a non-recognizable USB device on Youtube and IT forums. Does this method apply to your situation? Go on to have a check.

Step 1. Type device manager in the search box to open Device Manager.

Or you can press Windows + R keys simultaneously to bring up the Run box, then type devmgmt.msc, and hit Enter.

Step 2. Expand 'Universal Serial Bus Controllers' and you will see the item called 'Generic USB Hub'. Righ-click on the first Generic USB Hub and choose Properties.

Step 3. Now, navigate to the 'Driver' tab, choose 'Update Driver...'.

Step 4. When asked how do you want to search for driver software, there are two options.

1. Search automatically for updated driver software

This way is an automatic update by Windows. When it finished, all you need to do is to disconnect the USB device, restart the computer and reconnect it again. Windows will install the latest driver for you.

2. Browse my computer for driver software

When you choose this option, you need to continue with the other pop up 'let me pick from a list of device drivers on my computer.'

From the list, select Generic USB hub, which normally the only choice. Click 'Next' and then Windows will install the driver for you.

In the same path to update the driver, you can also try to roll back to the previous driver before the error occurs. Instead of selecting 'Update Driver' in the 'Driver' tab, choose 'Roll Back Driver' this time.

The changes made on the computer power and the device driver should take effect, and your USB device will no longer report issues. Otherwise, try the rest three methods one by one.

Fix 4. Fix USB Root Hub to Fix USB drive not recognized

The USB root hub is the software driver that lets you connect multiple USB peripherals to your computer. Most computers have multiple root hubs so you can share the data bus across multiple devices. So if the computer cannot recognize your USB drive, you can try to fix the USB root hub.

Step 1. Open Device Manager. Find the Universal Serial Bus controllers option and single click it to expand.

Step 2. Find the USB Root Hub option in this category. Right-click it and choose Properties.

Step 3. Go to the Power Management tab and uncheck the 'Allow the computer to turn off this device to save power' option. Then click OK to save your change.

Fix 5. Change the USB Selective Suspend Settings

Another possible reason why your USB got malfunctioned is the hub driver suspends the USB automatically. In this case, change the USB selective suspend settings could help.

Step 1. Right-click on the Windows icon and click Power Options.

Step 2. In the Choose or customize a power plan windows, click Change plan setting

Step 3. In the Edit Plan Settings window, click Change advanced power settings.

Step 4. In the Power Options window, find and expand USB settings, expand USB selective suspend settings and Disable both On battery and Plugged in settings.

Step 5. Then Click Apply and OK to save the settings.

Fix 6. Uninstall USB device driver to make USB recognized

Being different from the options of updating or degrading the driver version, uninstalling the driver could result in a total disability of all the USB ports. So take care of this last-try method.

Step 1. Open Device Manager (Right Click on Windows Logo and Click Device Manager).

Step 2. Now find and expand Universal Serial Bus controllers. Now right-click on USB drivers and click Uninstall. Do for all USB drivers one by one.

Step 3. Now, restart your PC. The USB drivers are automatically re-install and solve the corrupted USB devices problem.

Further Troubleshooting: Data Recovery

Those six ways we mentioned above are all the possible ways said to be helpful to fix the 'USB device malfunctioned and not recognized' error.

If one of the fixes worked, you should be able to access your USB and use the saved data again.

What if you opened the USB drive but find something missing? You need third-party software to retrieve your data. Here, EaseUS disk data recovery can help even when your USB device is listed in disk management but not showing up on your computer. The program works well in Windows 10/8/7/XP and other previous versions.

Step 1. Run USB data recovery software.

Connect the USB flash drive to your computer and launch EaseUS USB data recovery software on your PC. Select your USB drive which marks as a removable disk, and click 'Scan' to start finding your lost files.

Step 2. Scan all lost files from USB.

EaseUS Data Recovery Wizard will thoroughly scan your USB flash drive and find all your lost data on it. After the scanning process, use the Filter feature to filter a specific file type. You can check and preview found USB files in this program.

Step 3. Restore all lost files from USB.

A double-click will allow you to preview the file results. Choose the target files and click 'Recover' to save them to a secure location on your PC or other external storage devices.

To retrieve data from USB devices, we suggest you save retrieved files to another secure location in case of further problems.

Format USB to NTFS/FAT32 and recreate partition on USB

Some people encountered more serious issues than once. They said the same USB device starts malfunctioning again after a short period of time after the repair. If this is the case, formatting and recreating a new partition can help.

• Connect the USB to the PC, right-click on This PC/My Computer and select Manage.
• Enter Device Manager, select Disk Management, locate and right-click on your malfunctioned USB, and select Format volume...
• Complete the Format process and set the file system to NTFS or FAT32.

Now you can check if the USB shows up in your computer or not, if not, continue with the steps below:

• Open Disk Management, right-click on USB and select Delete Volume, complete the process.
• When USB shows as unallocated, right-click on it and select New Simple Volume, set the drive letter and file system (NTFS/FAT32) for it, and complete the process.

After this, you should access the USB drive on your PC and save data on it again.

Dec 21, 2020 • Filed to: USB Recovery • Proven solutions

Drivers Sfere Port Devices Online

Have you ever had difficulty connecting your devices to your computer using a Prolific USB to Serial adapter? If yes you are lucky to find this page, it will give you all the information need to fix an unresponsive Serial driver adapter. You may have noticed a yellow exclamation mark hovering over or beside the USB to Serial Driver when searching your Device Manager and if you have we can all agree that it signifies a prevailing problem.

Overview of the Error

If you are not able to connect your device to your PC using a USB to Serial adapter it may be that

• The USB driver is outdated
• The USB Driver is missing
• Or even a corrupted driver

While you can't be so sure what the exact problem is there are solutions you can adopt to fix the issue once and for all. Read on to find quick fixes to resolve the problem.

1# Fix Prolific USB to Serial Driver not Working

Solution: Roll your Prolific USB to Serial Driver back to an older version

Updating your drivers often work wonders for your system because it makes sure that it runs on the latest features that guarantee maximum functionality. Unfortunately updating your drivers can cause this kind of error especially if your latest update does not work too well with your hardware. Once you upgrade your PC to the latest Windows version your Prolific USB to Serial Driver also updates to the latest driver software and if the driver is not compatible with your Hardware issues may arise. To correct the error, you will have to download the driver again by following these steps.

• Right-click on your PC Start button and open Device Manager

• Double click LPT and COM ports then locate the Prolific USB to Serial Driver and right-click it so you can select Update Driver

• For driver software click My computer

• From My computer select 'Let me pick from a list of drivers available'

• Choose an older version from the list then click Next

• The driver you selected will be installed automatically
• Once it has been downloaded reconnect the driver to see if it works.

2# Fix Prolific USB to Serial Driver 'Coder 10'

Driver issues reveal themselves in so many ways or through messages such as

• This device will not start (Code 10)
• There is no driver installed in this device
• The driver was not successfully installed

A code 10 error may arise because the chip you are using is not an original one. If you are using a fake, the manufacturer has a way of disabling it due to copy write infringement and the copy write takes effect once you download a recent update. To protect your PC from getting this code, you will have to make sure that your Windows 10 never updates a driver without approval. Updates come in the form of 64 bit and 32-bit drivers. Below we will show you how to work your way around the problem.

Window 64 bit Fix

To fix Windows 64 bit OS including Prolific USB to Serial Adapter, follow through these steps.

• Download 'PL2303_64bit_Installer.exe and Save
• Remove every USB to Serial adapter from your PC and double click the 'PL2303_64bit_installer.exe
• Follow the prompt by plugging in one USB to Serial adapter the click on Continue
• Reboot your PC to get Windows up and running

If you have followed these process through and you still see the same error go to your device manager

• Open the control panel and navigate to Device Manager
• From your control panel navigate to the System category and click the Hardware tab
• Scroll to the LPT/COM port and double click Prolific USB to Serial Comm Port
• Click Drivers in the Properties section
• The Driver you choose should read '3.3.2.102 with an appropriate date attached
• If the date is wrong then it means the wrong driver was installed
• Unplug the Serial adapter and run the steps again to install the correct driver

Window 32-bit

Drivers Sfere Port Devices Gigabit

For Windows 32-bit OS systems follow these steps

• You will have to download the 'PL-2303_Driver_Installer.exe and save from Microsoft download link
• Run the program and eradicate the driver if you can
• Run the installer once more to install a correct driver

To Troubleshoot for error if your device still does not work

• Go to Control panel, enter System to access your Device Manager
• Scroll down to the LPT/ COM port then double click Prolific USB to Serial Comm Port
• Click Driver in the Windows Properties section
• The driver must be numbered as '2.0.2.8' and dates accordingly

Drivers Sfere Port Devices Lucie

If the driver was not installed, remove the Serial adapter then run 'PL2303_Driver_Installer.exe' again. Follow directions in Device Manager to download the correct driver

The three solutions listed in this article have proven to be quite helpful in fixing a Prolific USB to Serial driver not working on Windows 10. They may appear confusing at first but if you follow each step in detail you can resolve the issue.

Video Tutorial on How to Fix USB Device Not Recognized

Drivers Sfere Port Devices Bluetooth

USB Solution

Recover USB Drive

Format USB Drive

Fix/Repair USB Drive

Know USB Drive